Established in February 2015, Shenzhen Radium Intelligent System Co., Ltd. is a national high-tech enterprise dedicated to providing advanced laser radar
Aluminum alloy light frame is also called truss, truss frame. Generally, it is a combination of 6061-T6 aluminum through cutting, processing, welding, polishing, painting, etc.
Aluminum alloy light frame is also called truss, truss frame. Generally, it is a combination of 6061-T6 aluminum through cutting, processing, welding, polishing, painting, etc. It is widely used in performances, exhibitions, event celebrations, background layout, lighting and sound hanging systems. Because of its quick installation, any terrain can be designed and built, mobile storage is quite convenient, and it can be decorated with lights at will. Therefore, our stage lighting stand is the best choice for lighting effects. It can also be built into various large, medium and small truss systems according to the site, and can be flexibly combined according to specific requirements. The weight is light, easy to build and transport, the maximum span can reach more than 30 meters, and the aluminum is extremely resistant to compression, corrosion and durability. According to the shape, it can be divided into single-row frame, tripod, square frame, and special-shaped frame. According to the installation category, it can be divided into bolt type truss and screw type truss.
Pinyuan stage truss provides you with answers to how to build aluminum alloy light stands. Construction requires a complete set of lifting system, base, reverse head, diagonal brace, square sleeve, cross arm, sling, hoist (hand-held or electric).
Base: Mainly used to stabilize the entire shelf.
Reverse head: used when the height of the building is high, the function of erecting a higher height through the reverse head.
Inclined support: used to support the stability of the entire system of aluminum alloy truss.
Square sleeve: The height of the beam can be easily adjusted through the square sleeve.
Cross arm: At the top of the truss, it is mainly used for hanging the hoist.
Sling: The tie that connects the hoist to the aluminum alloy truss.
Hoist: It can be divided into two types: hand chain and electric hoist, used for lifting aluminum alloy truss.
Truss construction method:
1. Connect the reverse head and the base with screws
2. Put the square sleeve on the outside of the reverse head
3. Connect the beam to the square sleeve with screws
4. Turn over the counter-barge joint and connect the column frame with screws
5.The cross arm is connected to the top of the column with screws, and the hoist is hung at the same time
6. Connect the four columns and the cross arm hoist in turn
7. Erect the column
8. Connect the beam and the hoist with a sling
9. The four beams are raised at a uniform speed by the chain hoist. During the raising process, pay attention to observe the level of the beam to adjust
10. After rising to the same level, use the bumper to fix the hoist chain
11. Connect the extension feet and accessories to the base
12. Connect the diagonal struts and the extension feet of the base with screws to enhance stability
If you want to know the relevant detailed knowledge, you can pay attention to the Pinyuan stage truss
The editor is here to answer your questions at any time!
The industrialization boom of Lidar (LiDAR) comes from the strong demand for autonomous vehicles.
There are many kinds of trusses, such as aluminum alloy trusses, steel trusses, reinforced concrete trusses, prestressed concrete trusses, wood trusses, steel and wood composite trusses, steel and concrete composite trusses.
Lidar is driving the development of autonomous driving technology, which is an important sensor in most autonomous driving programs
Compared with new energy vehicles, which only bring about changes in driving style, autonomous driving will completely subvert the ecology of the automotive industry.